2001 Yamaha R6 Limited Edition #59 of 1000

How to Install Street Glow Neon Hott Wirez on your Bike.

Instructions Part 3 (Gluing And Testing)

- Well Since You Made It This Far, I Suggest You Go Grab a Cold One And Admire Your Work of Art. Nothing Like a Buzz And Working With Electrical Equipment.
- Don't Over Estimate the Importance of Taking Your Time While Gluing on the Neon Wire. Screw It Up, You're Stuck With It.
- 3Very Important Things:
1. Make Sure There is Enough Slack on the Transformer End of the Cable. For Example, If You Have to Lift the Tank Up to Get to Anything, You Do Not Want to Put Stress on the Wire.
2. The Glue Will Flow Down the Wire Because of Gravity. So Say You Put it Around the Tank, Start at the Top Near the Handle Bars. This Minimizes the Mess And Makes Life a Little Easier.
3. Before Applying the Glue to the Wire, Run Your Finger on the Area Where the Wire is Going. Like I Said Before, This is Helps the Adhesive Process Somehow...? Do Less then 3" Or 4" at a Time. It Becomes Almost Unmanageable if You Do It Any Longer.
- Here We Go. Start Gluing on the Wire Like I Said Above in 3" to 4" Sections. Remember to Wipe With Your Finger.
- As You're Gluing, Remove the Scotch Tape So That You Have Some Slack in the Wire. You Need to Be Able to Get Your Fingers Between It And the Bike.
- If You Do End Up With Excess on Either End, You Can Cut the End And Use the Heat Shrink to Cover the End. If You Get Excess on the Transformer End, Just Push It Into the Battery Compartment Area.
- Once You Finish, Turn It On With the Switch Again And Yell for the Woman. Girls Love This Neon Stuff. So Even If You Don't Do Such a Good Job Your First Time, She Will Say, "Wow Baby! I Like That Neon, That's Cool! You're Friends Are Going to Be Jealous of Us." Which is Exactly What My Girlfriend Said! LMAO
- Put the Seat Back on And Go Do Some Wheelies To Celebrate.
- Here's the Cool Part. Go Out with Your Riding Buddies Before It Gets Dark And Go Eat Somewhere. Plan It So That It's Dark When You Get Done Eating. When Everyone Goes Back Out to the Bikes, Reach Down And Switch It on Like It Was Part of Your Pre-Riding Routine. I Guarantee the First Guy That See It Will Say "HOLY SH*T!" Always an Attention Getter in a Crowd LOL You Will Spin 10 Minutes Talking About It.

Disclaimer

If you Have Any Questions E-Mail Me minfinger@nations.net

Main Instruction Menu

Tools Needed

Parts Needed

Instructions Part 1 (Prep Work)

Instructions Part 2 (Hooking Up the Power And Testing)
Instructions Part 3 (Gluing And Testing)

My Neon Pictures

Home

The Bike

The Rider

The Pictures

The Neon

The Gear

The Toys

The Mods

The Crashes

The Scars

 

The Rides

The Friends

The Links